Quantcast
Channel: SCN: Message List
Viewing all 8746 articles
Browse latest View live

Re: How to check user history of logon.

$
0
0

Hello Manjappa,

 

You can try below.

 

1. Goto STAD, Give date and hit Enter. This will give you all the transactions executed for that day with users list.

 

2. Goto ST03N--->Expert Mode--->Expand Instance name-->Double on week you want to view. Below in Analysis Views, Goto Transaction profile/standard to check what transactions have been executed for that week (but you do not have user name in this list). Goto User and Settlement Statistics to check User history for that week (but you do not have Transaction code in the list)

 

So you have to prepare some custom report based on STAD and ST03N.

 

You can also access STAD from ST03N. In ST03N, Expand Detailed Analysis and double click on Business Transaction Analysis.

 

Hope this helps.

 

 

Thanks.

 

 

Best Regards,

Srikanth


Re: Delta Mechanism and Repair Full Load

$
0
0

My question was if drop data from ODS-A before reload FROM 8ODS-B required re-int or not? There is no further processing from this ODS-A. Only concern is deleting delta init to reintialize for new delta after reload from souce 8ODS-B, the source (8ODS-B) feeds not just ODS-A but other 4 ODS targets (C,D,E,F). So by reinitializing from datamart (8ODS-B),can that cause any discrepancy or loss of delta for other ODS (C,D,E,F) that pulls from 8ODS-B ?  Can someone please clarify my doubt?

 

Thank you

Re: Content Conversion in Sender Mail Adapter

Re: Sybase Replication Warm Standby : how long does a transaction remains in the LDS inbound queue

$
0
0

If there's no true backlog (eg, rs_ticket goes through right away) then (off the top of my head) I can think of a couple reasons for a delay in freeing up the queue's segments:

 

- DSI save interval has been set (config name = 'save_interval')

 

- DSI has been configured to allow non-blocking commits (config name = 'dsi_non_blocking_commit'); behind the scenes this implements an implicit save interval for the connection's recently processed segments

 

I'd want to get a detailed look at the queue's used segment count.  Try running the following in the RSSD:

 

=======================

-- NOTE: For segments allocated to routes you'll need to join to

-- rs_sites (instead of rs_databases)

select    db.dsname,

          db.dbname,

          s.q_type,

          -- all segments that have been allocated to a queue

          sum(case when s.used_flag >= 1 then 1 else 0 end) as alloc_count,

          -- used but not-yet applied segments have used_flag = 1

          sum(case when s.used_flag = 1 then 1 else 0 end) as used_count,

          -- applied but awaiting cleanup segments have used_flag > 1

          -- actual number represents number of seconds until cleanup

          sum(case when s.used_flag > 1 then 1 else 0 end) as saved_count

from      rs_segments s,

          rs_databases db

where     s.used_flag   >= 1

and       s.q_number     = db.dbid

group by db.dsname, db.dbname, s.q_type

order by 4 desc

go

=======================

 

If used_count is (relatively) large then you have transactions that haven't been applied to the RDB yet.

 

If saved_count is (relatively) large then your connection has been configured to save the transactions (on those segments) for some period of time.

 

Message was edited by: Mark A Parsons; added alloc_count to query

Re: actual post goods issue date

$
0
0

hi Srinu S

thank you a lot for your reply, can you check something for in your system, my users have the authorization for movement type 601 but it's activity is Create or generate, Display so if you can check in your system if it must be Create or generate, Change, Display

Re: J1BNFE - Estorno antes da autorização (NFe 3.10 - SP18)

$
0
0

Bom dia Gizela,

 

A funcionalidade foi criada para o use case de momentos de indisponibilidade de comunicação/governo onde não se conseguia a autorização para poder realizar o cancelamento. Junte isso ao estoque "preso" à NFE em processamento acabava por bloquear todo um processo gerando prejuízo financeiro.

 

@Vitor,

Como a Gizela lembrou, o fato deles usarem de forma incorreta à princípio só gera o transtorno de fazer o cancelamento depois. Uma autorização ou um Z pode bloqueá-los mas a necessidade existe, se não for uma base grande um treinamento poderia amenizar o problema.

 

Outro ponto, se isto chega a ser um problema pode ser que a velocidade de autorização de seu sistema não está adequada verifique a configuração de jobs, fechamento de lote e PI para garantir o melhor tempo possível.

 

Resolvendo a questão de autorização de forma rápida você já resolve a questão de cancelamento pré-autorização.

 

Atenciosamente, Fernando Da Rós

Re: Issues in Uploading Capitalization Document? SAP B1 V9.0

$
0
0

Hi,

 

Your issue is similar to the Note No. : 1942546.

 

Upgrade the COPY of the database to PL09 or higher and check whether the Assets appear in the depreciation run or not.

 

Regards,

Jitin

SAP Business One Global Support

The installer found unexpected changes to the install script

$
0
0

Hi,

 

I've just try to install PC Client 15.7 "EBF 23439: 15.7 SP130" Just downloded from Service Market Place on a Win 03 R2 32 bit and on Windows 12 R2 64 bit

 

On Win 03 R3 32 bit it works fine but in  Win 12 R2 there isen0t any way to run Sybase Central.

 

When I try to uninstall, on each machine, there are only thi message:

 

Unable to lunch installer

 

The installer found unexpected changes to the install script:

 

ZZZ_58 2014-12-13 16.06.jpg


Re: Nfe 3.10 - CC-e com Rejeição: 999 - Erro não catalogado

$
0
0

Bom dia Cristiane,

 

O número sequencial que você está enviando é 1, mude na configuração para 01 e tente novamente.

 

Atenciosamente, Fernando Da Rós

DME file generation dump in quality system

$
0
0

hi

 

I am generating a DME file.

 

It is getting generated properly in development.

 

However in quality system I am getting a dump :

 

Runtime Errors         DATASET_NOT_OPEN

Except.                CX_SY_FILE_OPEN_MODE

 

Short text

    File " " is not open.

 

Can anybody tell me the cause for this dump in quality?

Re: The control could not be found by id

$
0
0

Hi gurus,

I´m trying to upload multiple registries for a certain customizing task in SPRO (SPRO > Material Management > Purchasing > Purchase Order > Set Up Stock Transport Order > Assign Document Type, One-Step Procedure, Underdelivery Tolerance).

 

I have followed the script creation instructions given in this link:

 

http://scn.sap.com/docs/DOC-57020

 

Everything looks fine until it comes the moment when it has to upload line by line of the source Excel file.  Instead of uploading each of the lines of the Excel file, (starting from the Excel file´s second line due to the first is for column heather) it uploads values "COL1", "COL2" and "COL3" and them brings the error mentioned in this post (The Control could not be found by id").

 

I have an Excel with 5 columns:

SuppyingPlant named as "SP" column in the xls file, equals to column 1 of the xls file

ReceivingPlant named as "RP" column in the xls file, equals to column 2 of the xls file

DocType named as "DT" column in the xls file, equals to column 3 of the xls file

OneStep flag named as "OS" column in the xls file (this is a flag), equals to column 4 of the xls file

Tolerance (empty for all the registries), equals to column 5 of the xls file

and 2000 lines=registries for sap.

So the idea is the script to take care of performing this task 2000 times while I have a coffee .

 

I look forward to receiving your comments.  Many thanks to all in advance.

 

If Not IsObject(application) Then

        Set SapGuiAuto  = GetObject("SAPGUI")

        Set application = SapGuiAuto.GetScriptingEngine

End If If Not IsObject(connection) Then

        Set connection = application.Children(0)

End If If Not IsObject(session) Then

    Set session    = connection.Children(0)

End If If IsObject(WScript) Then

    WScript.ConnectObject session,    "on"

    WScript.ConnectObject application, "on"

End If session.findById("wnd[0]").maximize

REM ADDED BY EXCEL *************************************

 

Dim objExcel

Dim objSheet, intRow, i

Set objExcel = GetObject(,"Excel.Application")

Set objSheet = objExcel.ActiveWorkbook.ActiveSheet

For i = 2 to objSheet.UsedRange.Rows.Count

COL1 = Trim(CStr(objSheet.Cells(i, 1).Value)) 'Column1

COL2 = Trim(CStr(objSheet.Cells(i, 2).Value)) 'Column2

COL3 = Trim(CStr(objSheet.Cells(i, 3).Value)) 'Column3

COL4 = Trim(CStr(objSheet.Cells(i, 4).Value)) 'Column4

COL5 = Trim(CStr(objSheet.Cells(i, 5).Value)) 'Column5

 

REM ADDED BY EXCEL *************************************

session.findById("wnd[0]/tbar[0]/okcd").text = "/nspro"

session.findById("wnd[0]").sendVKey 0

session.findById("wnd[0]/tbar[1]/btn[5]").press

session.findById("wnd[0]/usr/cntlTREE_CONTROL_CONTAINER/shellcont/shell").expandNode "02  1    19"

session.findById("wnd[0]/usr/cntlTREE_CONTROL_CONTAINER/shellcont/shell").topNode = "01  1      1"

session.findById("wnd[0]/usr/cntlTREE_CONTROL_CONTAINER/shellcont/shell").expandNode "03  2      3"

session.findById("wnd[0]/usr/cntlTREE_CONTROL_CONTAINER/shellcont/shell").topNode = "01  1      1"

session.findById("wnd[0]/usr/cntlTREE_CONTROL_CONTAINER/shellcont/shell").expandNode "04  3    65"

session.findById("wnd[0]/usr/cntlTREE_CONTROL_CONTAINER/shellcont/shell").topNode = "03  2      3"

session.findById("wnd[0]/usr/cntlTREE_CONTROL_CONTAINER/shellcont/shell").expandNode "05  4    24"

session.findById("wnd[0]/usr/cntlTREE_CONTROL_CONTAINER/shellcont/shell").selectItem "06  4    29","2"

session.findById("wnd[0]/usr/cntlTREE_CONTROL_CONTAINER/shellcont/shell").ensureVisibleHorizontalItem "06  4    29","2"

session.findById("wnd[0]/usr/cntlTREE_CONTROL_CONTAINER/shellcont/shell").topNode = "04  3    27"

session.findById("wnd[0]/usr/cntlTREE_CONTROL_CONTAINER/shellcont/shell").clickLink "06  4    29","2"

session.findById("wnd[0]/tbar[1]/btn[5]").press

session.findById("wnd[0]/usr/tblSAPL0ME6TCTRL_V_T161W/chkV_T161W-UML1S[3,0]").selected = false

session.findById("wnd[0]/usr/tblSAPL0ME6TCTRL_V_T161W/chkV_T161W-TOLKZ[4,0]").selected = false

session.findById("wnd[0]/usr/tblSAPL0ME6TCTRL_V_T161W/ctxtV_T161W-RESWK[0,0]").text = "SP"

session.findById("wnd[0]/usr/tblSAPL0ME6TCTRL_V_T161W/ctxtV_T161W-WERKS[1,0]").text = "RP"

session.findById("wnd[0]/usr/tblSAPL0ME6TCTRL_V_T161W/ctxtV_T161W-BSART[2,0]").text = "DT"

session.findById("wnd[0]/usr/tblSAPL0ME6TCTRL_V_T161W/chkV_T161W-TOLKZ[4,0]").setFocus

session.findById("wnd[0]").sendVKey 0 session.findById("wnd[0]/tbar[0]/btn[11]").press

session.findById("wnd[1]/tbar[0]/btn[0]").press

REM FINALIZATION CONTROL CHECK ************************

 

aux=col1 & " " & col2 & " " & col3  & " " & col4 & " " & col5

CreateObject("WScript.Shell").run("cmd /c @echo %date% %time% " & aux & " >> C:\Users\nbacich\Desktop\SCRIPT\Test1.txt")

next

msgbox "Process Completed"

 

REM FINALIZATION CONTROL CHECK ************************

Re: DI Error: In the "Qty (Inventory UoM)" column, enter a whole number greater than 0

$
0
0

Is the provided sample causing trouble?

Re: ERP 6.0 component upgrade (NW + Fiori app)

$
0
0

Dear Ireneusz,

 

 

please understand that such workaround - skipping the installation of a package - is not supported by SAP Support.

 

The log you mentioned had warnings only, not errors. The real problem can be seen here:

 

A2EE/CTSPLUG/CTS_PLG_MSG 051 tp "IMPND" call failed for trkorr "SUBSET", tp-RC " "

A2EE/CTSPLUG/CTS_PLG_MSG 051 tp "IMPND" call failed for trkorr "SUBSET", tp-RC " "

A2 E/CTSPLUG/CTS_PLG_MSG 052 tp return code "0", RFC message: &1"0"&2"Could not convert from 4103 codepage to 1100 codep"

1AETR012XProgram canceled (job "RDDEXECL", number "19202100")

1AEPU320 See job log"RDDEXECL""19202100""ER1"

 

You have to check the job RDDEXECL details in SM37 to find the work process it was run on; then you should go to ST11 and check the corresponding dev_w* file to find the root cause of this issue.

 

I'm posting this reply for the community to be aware that skipping errors during XPRAS - or any other upgrade phase - is not the solution.

 

Best regards,

 

 

 

Tomas Black

Re: Add folder to a screen created by object generation wizard

$
0
0

You could try editing the standard window and then saving the edited form to XML. Then just develop a simple addon that'll load the form from XML on some menuItem event.

Re: Only Delete duplicate Matnr

$
0
0

This should be handled automatically in an ALV list if you sort by the item number.

 

Rob


Re: SUM and upgrade to EHP Updates to Suite 2013 SP06

$
0
0

Hello Rupert,

 

 

it is correct in selecting SR1, beacuse you're going to 740 SP06. SR2 has a target release of 740 SP08. You can quickly check this in note #330104, in section "SRM 7.0 EHP3 (SRM 7.13)".

 

Best regards,

 

 

Tomas Black

Re: how to get length of table loaded from oData/JSON model

$
0
0

thanks Max.

i've used oTable.getBinding("items").getLength().

in both before and after rendering functions.. i got it as '0'. And my JSON loading is done onBeforeRendering function not onInit().

 

requirement: i've an icon in table toolbar, which displays the total no. of records loaded into table.

 

and where do I use dataReceived or dataChange ? oModel or oTable?

Re: Only Delete duplicate Matnr

$
0
0

Hi Rob,

 

maybe this is just the question here...

~Florian

Re: how to get length of table loaded from oData/JSON model

$
0
0

Neither of them. The events are both fired on the binding (actually, they are called change and dataReceived, my previous post wasn't correct here).

So you'd need to do something like:

oBinding = oTable.getBinding("items");

oBinding.attachDataReceived(function() {

     var iLength = oBinding.getLength();

     // Update UI elmennts based on iLength

});

- Max

Re: BPC to Webi Reports Staff Hierarchy

$
0
0

Hi Bishwajit,

Thank you for the reply.

I hope the attached screenshots help.

Connection is done via CMC as attached.

I then choose the transient query after selecting BEx as my query type in the webi document.

BW Hierarchy also attached.  As i said previously, I cannot see any of the leaf level ST_ nodes.

Thank you, Matt.

 

STAFF BW Hierarchy.jpg

 

 

Example Transient Query.jpg

 

 

Generic BW CMC Connection.jpg

Viewing all 8746 articles
Browse latest View live




Latest Images