MDG-S/C come with DB search as the default. So you already have it active and can use it e.g. when searching for "General data".
MDG-M worksdifferently here, as it would be hard to implement a classification search w/o ES, and you usually have classification on materials.
isnull(cast(notes as varchar(10), 'X')) as notes,
now all the values are showing as 1
thanks dular sharma,
i need where i put validation in post method..!???
i new to sap-ABAP...!!
PLEASE SHARE the Screen shots...!!
and sample code ..!!
Dear friends,
While booking course for all employees I am getting a strange error as below:
Checked other threads in scn but no help. All employees are hired in 1st Jan 2015.Course exists from 1st april 2015. Checked relevant infotypes too.
Regards,
Niladri
Hi,
In POST method when you click on signature you will find two structure mentioned below.
IM_EBELN
IM_HEADER
Put break point in method , create one PO and save then check in which field value is coming and than validate it.
Thank You.
Dular Sharma.
Hi Satya,
First the check the material in MB5B whether it has issued for further production.
Regards,
Mukthar
Is the column in the datawindow editable?
Hi gentlemen, I hope you don't mind me reviving the old thread (it was quite informative, thank you!)
The problem I'm trying to solve here is: how to move X and Y meters (by long and lat, respectively) from a given point? So far I found only the methods related to distance measuring between two geometries, but what about the reverse task?
So far I've been able to come with the following:
1. Buffer the given point with X meters.
2. Intersect it with a horisontal line beginning in the given point and ending somewhere far enough (+-180).
3. Get the endpoint of the resulting intersection line.
4. Repeat steps 1-3 for that endpoint using Y meters buffer and vertical line.
This kinda works, but it obviously does hell of an unneeded extra work.
An alternative might be:
0. Use a local projection that has (0,0) meters point bound to, say, (151, -31) geodegrees.
1. Transform the given point from degrees to meters of that local projection.
2. Calculate the new (+X, +Y) point in meters.
3. Transform the new point back to degrees.
In the second option I could actually do a lot more in the "local" projection and then transform the end result into degrees. Yet the spatial reference mentions the existence of ST_Transform method, but doesn't give any details at all.
Can anyone comment on these points? Did I miss any other solution?
P.S. Here's a third option which I may implement for the lack of anything better:
1. For the given point (x0, y0), find the distance between it and (x0+1, y0) -> gets the linear value of 1 longitude degree in the given locality
2. Do the same for the latitude degree.
3. Use those values as multipliers in local calculations.
Thanks for your prompt reply.
After a quick check the reference provided by you, i got some questions.
A. In LS24, different storage bins are showed. Does it mean WM but not lean WM is activated? Or, any other checking can simply know WM or lean WM activative?
B. If using LT0G (movement type 999) for the case below, should i just select the line item, change qty to zero, then exit the transaction? There is no ''save'' icon. LS24 does not show any update about this return.
After that, any other actions (Tcode)?
Case: outbound delivery status - transfer order confirmed
- GI not post.
ps. Source and detination storage type is defined the same value in movement type 999.
You need to use Administrator/<password specified during instance creation>
Thanks for your response bernhard. when i clicked on job text at failed level and got this .
Category ABAP Programming Error
Runtime Errors MESSAGE_TYPE_X
ABAP Program SAPLRSENQ
Application Component BW-WHM
Date and Time 16.09.2013 14:19:23
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Take note of the actions and inputs that lead to the error.
Contact your SAP administrator for further processing of the problem.
Using transaction ST22 for ABAP short dump analysis you can see and
administrate termination messages and retain them for a longer period.
Error analysis
Short text of error message:
Long text of error message:
Technical information about the message:
Message class....... "RSENQ"
Number.............. 221
Variable 1.......... 0
Variable 2.......... 2
Variable 3.......... "i_t_object"
Variable 4.......... " "
to correct the error
Probably the only way to eliminate the error is to correct the program.
-
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
please use the following search criteria:
"MESSAGE_TYPE_X" " "
"SAPLRSENQ" bzw. "LRSENQF08"
"MIGRATE_IPRO_C"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem (short dump).
To obtain this, select "System->List->Save->Local File (unconverte
on the current screen.
2. A suitable hardcopy printout of the system log.
To obtain this, call the system log with Transaction SM21
and set the time interval to 10 minutes before and 5 minutes after
the short dump. In the display choose "System->List->Save->
Local File (unconverted)"
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, choose "More Utilities->Upload/Download->Download" in
Editor.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
------------------------Object Migration (221-240)---------------------
Can anyone help me by the change of the version?
Name:com.sap.aii.af.axisproviderlib
Vendor:sap.com
Location:SAP AG
Version:7.4005.20131120165702.0001
Deploy status:AlreadyDeployed
Version:LOWER
needed version is 7.4008.20140808110905.0000
1) To check Lean WM is active or not please refer the below screen
B) LT0G Process steps (There are multiple thread available on SCN please search with the term LT0G return to stock )
Select the line item enter the return quantity and select any one option which is available on top based on your requirement (Putaway foregroud , Putaway Background or Return to stock )
C) Source and destination storage type is defined the same value in movement type 999.
in standard SAP for 999 there is no source and target storage type mentioned however based on business requirement individually client put the value in this so i am not sure what is the business requirement which led to maintain the same value in the source and destination storage type
Hi Karthik - I couldn't find a straight forward way, perhaps others will
An idea that I tried was setting up conditional formatting (that always makes the key figure color the same, no matter what) - see How to Set up Easy Conditional Formatting Design Studio 1.3
Hi,
can you crated the aggreagtes on the cube.
please recheck with the cube
while activating the aggregates or filling the aggregates.
please read the below docuement it will help.
Thanks,
Phani.
Thank you guys...
The SAP Notes 1224747 solve my problem!!!
regards
Hi,
If there is no update failure and still the data is not getting stored in table after system upgrade, please check the note: 2114695 - Material document missing after seemingly successful update
Regards,
AKPT
Problem solved!
NWDS> Deploy View > Update Strategy > Update deployed archives with any version
Hi,
here is the code which is used for binding...
| var oTable = new sap.ui.table.Table({ | |||
| tableId: "table", | |||
| visibleRowCount: 5, | |||
| editable: false | |||
| }); | |||
| var oControl = new sap.ui.commons.TextView({text:"{District}"}); | |||
| oTable.addColumn(new sap.ui.table.Column({ | |||
| label: new sap.ui.commons.Label({text: "District Name"}), | |||
| visible: true, | |||
| template: oControl | |||
| })); | |||
| oTable.bindRows("/"); | |||
| return oTable; |
-Mahi
