Beware,
SAP HANA is not the same than S/4 HANA. S/4 HANA is the next step replacing R/3 that is powered by SAP HANA is more business oriented.
When you say SAP HANA you are speaking only of a DB HANA, this appeared 4 or 5 years ago. S/4 HANA in the other hand appeared this years and is a chage on a business level powered with SAP HANA, SAP Fiori, Cloud, etc.
Regards
Unfortunately no it does not work. I get an error and the report is never parsed. A faint hope;
Looking at the version (13.0.9.1312) tells me that we're working with SP 9. SP 14 released last week. Can you please update the install to SP 14? The download links are in the following doc:
SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads
Make sure to use the install exe, not the MSI file.
- Ludek
Hi..
I haven't tried it yet but recommended size is "High Memory Quadruple Extra Large". I'm not sure but probably is c4.xlarge.
If your plan is stick with SAP.... ABAP all the way, now if you interest on JAVA is behond SAP go for JAVA.
With the coming of S/4 HANA has a lot of JavaScript so you could check it out SAP Fiori is powered with SAPUI5.
Regards
Would someone else mind trying to load an advanced dso with nav attributes to see if they have the same issue? Thanks!
Data Services primarily an ETL tool and provides the solution for data integration, data quality and text data processing, so I don't think you would be able to read emails within DS.
The combination of real-time services and text data processing features may help you.
Have a look at this discussion.All the best for your research 
What's behind repVendorMasterList.Database.SetDataSource rsReport ?
Do not reference Crystal Reports ActiveX Designer Run Time Library 11.5. More than likely you're not licensed to use this dll.
Use the Modules utility to compare the dlls loaded by the dev computer and the runtime computer. Look at differences between CR dlls, Access dlls and system dlls.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter
Hi Ravish,
As your requirement is to disaggregate in a separate key figure, you can directly multiply SALESFCST@PERPRODGRPto ZSALESFCST@PERPRODCUST based on Proportional factor KF ZPERCONTRB@PERPRODCUST.
You can refer to the following SCN post - Copy Key Figure with Disaggregation
Regards,
Aditya G
Hi Team,
We have a requirement of INDEPENDENTDEMAND@PERPRODLOC key figure in S&OP on-premise 3.0.2.2 version. Is there a workaround to achieve this?
Is there a way to add demand to DEPENDENTDEMAND key figure by changing the formula of DEPENDENTDEMAND key figure to:
=IF ("LOCID=''XXXX'', (DEPENDENTDEMAND + INDEPENDENTDEMAND), DEPENDENTDEMAND)
LOCID here will be manufacturing location only.
Supply Algo used: Unconstrained D/S (No Shortage)
Alternate way for this is by creating a dummy customer or setting higher safety stock but we want to keep that as option 2.
Thanks for your inputs.
Regards,
Aditya G
Hi,
We have a requirement where we need to configure the cost variants and rules based on the smoker status of both employee and the spouse/domestic partner. So the cost will be less when neither of them is a smoker and premiums will be higher when either or both of the employee and spouse/domestic partner is/are smoker(s).
In SPRO, when I go to the node Personnel Management-> Benefits-> Plans-> Health Plans-> Define cost variants, I can select the Smoker field from the parameter group section, but I can only refer to either Employee or Spouse or Domestic partner in the next section to choose the Relevant Data from.
Is there a way to refer to both employee and spouse/Domestic partner smoker status to determine the cost of the health plan?
Please let me know.
Thank you!
Regards,
Mausumi
Hi
The issue is fixed by adding a parameter OB2HOSTNAME =< servername from where the backup is taken>
Thanks and Regards,
Vimal
sorry. I didn't mention the location
it should be under /var/opt/Omni/tmp/Sybase_SID.cfg file
Hi Gautam,
ByD is a cloud based ERP tool originaly developed for Small & Medium enterprises. It involves many End to End scenarios like Finance, HR, OTC, PP, MM etc & also has limited CRM capabilities.
C4C otherhand is a 'lines of business' solution from SAP with full focus on Sales & Service.
As an example, in C4C you can create a lead, progress to opportunity, create quote & sales order but would not be able to do goods issue, invoicing & financial settlement. These have to be done on an on-premise solution like SAP ECC or a cloud based ERP solution like ByD.
Regards,
Rahul
Hi guys.
Very annoying problem.
Basically I have two BW systems, identically configured. I have one web service (remote enabled function module) created on each of them.
Web service from system 1 works perfectly fine, web service from system 2 causes xcelsius crash:
System 1:
System 2:
That's Spanish for "Xcelsius Stopped working".
I tried everything I could, different machines, windows XP, 7, 8.1 and 10, almost every xcelsius release, every Excel release... Nothing works.
Funny thing is that this was working a week ago, and no changes have made either to the system or to my machine.
These are the dump file logged after crash and the windows event viewer log:
Also, Fiddler throws this, only when I call the WS from the system that makes it crash:
Any idea guys what can I do to investigate further?
Hi,
This would require customisation as cloud by definition can be accessed from any location & on any device.
However, there is a private cloud concept but even then restricting it to an 'intra-site' doesn;t seems probable.
The easiest solution would be to change password validity to 1 day & give new passwords only at location.
Regards,
Rahul
Thank you Rahul.
If there is an ABAP stack system then configure DBACOCKPIT for the remote database so you can monitor the database from the ABAP stack.
Read the note 1261329 - DBA Cockpit: Oracle as a remote database
RB
HI Kiran,
The message you found in the SLT log you can lookup in the central finance system using transaction SE91. It reads: FINS_CFIN_GEN001
Short Text: Central Finance not active. If you have activated the central finance business function, i would like to recommend to implement the SLT correction notes via the general SLT note.
The error in the target system looks a mapping issue, have you configured the cost object mapping via the CF configuration?
Best Regard,
Jeroen.
MOPZ is required to install or patch the UI add-on because there are dependencies.
You need to select UI ADD-ON 1.0 FOR NW 7.03 which is shown at the bottom of the Add-on's list. In addition to the above notes check note 1666369 - Support Packages for the UI add-on 1.0 for SAP NetWeaver
RB
Adding server nodes in the config tool in not enough. You need to make sure there is enough space for the filesystem /usr/sap/SID.
If possible attach the std_server and dev_server logs
