Hi,
I think you can mention the exchange rate in the PO header Delivery/invoice tab . The FI conversion settings can be done by an FI since this involves with exchange rate types too .
Once a consignment PO is made GR and alreday in the stores have you tried the MIGO again ? or is it a Fresh PO ?
Regards
Do you have enterprise version of SAP BO ?
Please Provide exact version of the SAP BO.
Add proper license key of the SAP BO server. It should not be like that to add server license need to be buy.
Regards,
Dhaval
No, DSM does not need to be installed in PRD.
However, depending on the support package level of your PRD system you may need to implement some notes to get it run.
Hi Brad;
Thanks for the extra information!
Yes, I was thinking in Canadian dollars which right now are only worth about 75% of their US fund equivalent. So ... the $6,000USD gets inflated by 1.35 (current bank conversion to buy USD) to $8,100CDN and then we get another 13% HST added (no thanks to Prime Minster Harper) for a total of $9,153Cdn by the time the purchase is completed. Ouch! 
As far as Appeon is concerned, I just wanted to make sure that people knew that it was for native PB Classic applications only. I have had a few developers try to use your controls and then get frustrated when they die in either Appeon Mobile or Appeon Web. Not to criticize, but just manage peoples expectations as to the environmental limitations of the product. Otherwise, its an amazing face-lift for native C/S applications .. many thanks!
Regards ... Chris
Amit,
Thanks iam testing with single merged dimension but now i have three merged dimension instead of single
3 Merged Dimension columns(merged dim1, merged dim2, merged dim3) and measured column use IF else condition to display all three measures in one column against of these merged dimension
Could you help me with rephrasing the formula.
Appreciate your help.
Thanks,
Dinya.
Hi Chaitanya,
Here you can make use of system variables sfsy-page and sfsy-formpages , do some mathematics and put in back into some variables to use it.
Regards,
Shadab.
Hi
We need to enhance IMKEY for rental unit to accommodate building & sector information. This is for mapping the functional location in PM module, which with help of coding mask can have this key easily. So want to construct our own Identification number based on business entity, building, sector & rental object. Has anyone done this before. Can anyone point out if there is any Deal Breakers, which will stop the show in production down the line by doing this.
Example: we would like to have a key something like
1111/2222/AA/UNIT
where 1111 is the BE
2222 is the building, AA is the sector and UNIT is the Rental Object Number.
Technically, I have seen it is possible, also it is working fine in Creation, changing of RE Master data, also on contracts if I assign objects, Checked RE Standard reports too, looks fine. But would like to know if anyone has had bad experience in doing something like this.
Thanks in advance.
Regards
Sathar
Hello Balaji, Thanks for your reply. Well, I am working on a presentation for my client. Hence need to show the recent new functionalities or upgrades provided by SAP in warehouse space. I did try to do research, but land up nowhere hence thought of raising the question here. Based on my research, I suppose Yard management was the last invention by SAP in WM, but not sure if that is correct or not. Thanks Sanil
Hello Guys,
My requirement is to display blank value in ALV column field whenever value is initial in quantity or currency field.
Right now its showing 0.000.
Thanks,
Ashish
Hi Oliver Hi Venkat,
thank you for this hints.
One field will be getting filled through a z-search help created by me but the other two fileds
sholud populated through this way as described above by you and by Venkat.
Is it possible to get a short sample code relating to this requirement since it is a webdynpro.
Best Regards
Hakan
What type of database are you connecting to?
-Dell
Thanks all...
I have checked and found that all the four entries are populated in /SAPTRX/EH_EVMSG .
Furthermore, For the missing entry, the non relevant field is checked.
I have checked further and found that the event is getting triggered through expected event list (not through unexpected event ).. and there was no expected event mentioned for the same which was the root cause for the issue.
Regards,
Ratnakar..
I want to install IDES EHP7, I can see the export CDs 1/18 is released on 26th Aug 2015.
My question is how do I know what is the default/base SP level of the IDES version?
I couldn't find the information in any of the IDES notes.
Regards
Senthil
Hi Hakan,
Please confirm in business terms what data(user input/based on some logic) you want to populate.
If you have these fields open for input on WD screen, then context mapping will do the data passing for you.
If you want to assign some values based on logic(and not from user input), then you can populate these in BBP_DOC_CHANGE_BADI.
Hope it helps.
Warm Regards,
Shyam Agrawal
Hi
Most 3th party RFC system is not able to connect using the program id as SAP PI/PO can. I think last time we looked into it it was the way the JAVA JCO adapter worked. It could not just get a message direct.
Hi,
I implemented a service which is giving back necessary data obtained from an uploaded input xml file.
I've also implemented the expandend entity set method in order to get both header and items data from the file.
Now the issue is on the SAPUI5 side where I am not able to display the items data from the oData service which I am able to get filled correctly.
Attached here is the response I get from the oData service.
For the view, I am using a standard <Table> element inside an XML view.
Here is my code for the table, trying to get the necessary data for the items element.
Please note, fileContentPSet is the entity set which gives back the items.
<table:Table id="carrierTable">
<table:title><Textview text="Carrier Shipments [Uploaded]"></Textview></table:title>
<table:columns>
<table:Column>
<Label text="Invoice Num."/>
<table:template><TextView text="{invoiceNumber}" /></table:template>
</table:Column>
<table:Column>
<Label text="Container Type"/>
<table:template><TextView text="{fileContentPSet/containerType}" /></table:template>
</table:Column>
<table:Column>
<Label text="Transaction Date"/>
<table:template><TextView text="{fileContentPSet/transactionDate}" /></table:template>
</table:Column>
<table:Column>
<Label text="Tracking Num."/>
<table:template><TextView text="{fileContentPSet/trackingNumber}" /></table:template>
</table:Column>
<table:Column>
<Label text="Net Amount"/>
<table:template><TextView text="{fileContentPSet/netAmount}"/></table:template>
</table:Column>
</table:columns>
</table:Table>
Furthermore, I am able to display the data from the header odata response [e.g. I can see {invoiceNumber} ]
Thanks in advance if you can give some hints on this
Regards,
Claudia
So removing the "corrupt" version that used a new pointer to Odata Service resolved the issue. I am going to notify SAP in oss note I raised to inform them of findings. Again thanks for your guidance!
Ho Bharathiraja,
Thank you for your help. The format/column layout according to the chronological order in the calendar is correct but im just still trying t figure out why the values doesn't match in SAP.
Thanks,
Malu
Hello,
the relevant new feature are:
- see and kill the active user session
- configure the shown icons in WebI
Regards
Andreas
the have the same issue but i cant find solution
every thing is the same above solution
i have item category group ZBOM for all item it's copy from NORM 1 main item and 2 sub item and 3 sub item
in vov7
structure scope A
Application SD01
can any one help me ?
