Hello IBP Experts, Is there any easy way to create time profile entries? I am following SAP2 model. I have created similar time profile like SAP2 model for my SOP planning area. I am trying to create CSV flatfile to upload into IBP, but so far not successful. Is there any easy way to populate time profile entries in CSV file? As per your opinion, do you not feel creating time profile is very tedious in IBP(whereas it was very simple in APO) Can someone please help? Thank you Satish Waghmare
Easy Way to Create Time Profile Entries
↧
↧
Re: MRP issues
Hello
I see that most of your old threads are still open. Can you please review your old threads and close those where the issue is solved?
BR
Caetano
↧
Re: Creation of Re Transport Request for Org.Units
Hi Syed,
Please refer to note:
327908The transport system in the CRM/BBP system
548202 - Setup of CRM org. structure
Best regards,
Ellen
↧
Re: Assembly scrap not matching with MD04 requirement
Hello
Do you see a expected yield variance on your order after the confirmation?
If so, this is causing the difference on the quantity. You can deactivate this calculation on the production scheduler profile.
BR
Caetano
↧
Re: Workflow giving error.
The error message in ST22 will tell you what the problem is. Have a closer look at that!
cheers
Paul
↧
↧
Re: Issue in reversal of reservation 222Mvt in MB1A
Hi Manoj
You might have issued the material with reference to reservation, find out all material documents from MSEG table and then perform cancellation of Material Documents in MIGO or use MBST to cancel the material document posted.
Thanks,
Jagdeep
↧
Re: No mapping function module entered in SMOFSUBTAB
Dear Rahul,
Please maintain the following entry in table CRMSUBTAB for object BEABILLDOCCRMB on R/3 side:
Application: CRM
Object name: BEABILLDOCCRMB
Upload or Download Relevant: U (Upload)
Object class: BEABILLDOCCRMB
Name of Function Module: BILL_DOC_INBOUND
If such an entry already exists, then ignore the above step.
The SYSFAIL appears to be due to the temporary unavailability of the R/3 CRMSUBTAB table.
Please make sure all BEABILLDOCCRMB Bdocs are processed succesfully, then you can delete the queue.
Best Regards,
Ellen
↧
Re: No more storage space available for extending an internal table.
Can someone please help us on this issue.
↧
Re: Workprocess on hold Reason MSOP
Can someone please help us on this issue.
↧
↧
Re: SAP PP Things to keep in mind when changing from PD to ROP MRP Type
In addition, dependent requirements are not displayed on MD04.
BR
Caetano
↧
Re: Cannot edit new Interactive Script
Hi Carlos,
I think you need to do it in each server. After it is done, don‘t forget to clear the cache from JAVA.
Best Regards,
Bruce
↧
Re: Starting ABAP instance: ORA-12505: TNS:listener does not currently know of SID given in connect descriptor
did you means that, the sap can be up if you manually bring up database?
↧
Re: Enhanced Odata service is not visible after transport
HI David,
Please check the apps extension in Back end
Design Time: Extension Include (in DDIC Structure) : - CRMT_BP_ODATA_ADDRESS_INCL
regards,
Ashish
↧
↧
Re: MIRO: Correct The Tax Reporting Date
Hi Thorben Hald,
Can you please post the scree shot of the error , so we can try to provide advice .
Regards
Hidayath
↧
Re: Removal of unused characteristic in COPA structure
Hello
To delete characteristics or value fields, perform the following activities:
1. Delete the corresponding characteristics and value fields from Customizing in all clients (this includes forms, reports, planning layouts, and so forth). To locate characteristics and value fields, use the appropriate where-used list in the Customizing Monitor. You can access it by choosing Tools -> Analysis -> Check Customizing Setti (TA KECM). You can jump directly from the where-used list to the relevant Customizing transaction and then delete the appropriate field there.
2. Switch to the screen for maintaining the data structure of an operating concern (Maintain operating concern).
3. If you need to effect other changes to the datastucture for the operating concern before making any deletions, effect those changes and save the data structure.
4. In order to be able to select the fields of the data structure, choose Extras -> Characteristics (or Value fields) -> Unlock.
5. Select the characteristics and value fields to be deleted and remove them from the data structure with the "Reset fields" function.
6. Reactivate the operating concern. The system starts by checking whether the operating concern contains any data and whether the fields to be deleted are still being used in any Customizing settings.
7. If none of the fields are still in use, the system then starts the re-activation. If the operating concern does not contain any data or does not require the database system to be converted, the tables are activated. You are then able to activate the environment for the operating concern. In this case, the following activities no longer apply. If the operating concern already contains data, a system message tells you that the database needs to be converted. If you proceed, an activation log appears (at the top of the list).
8. Analyze the activation log. If it only contains error messages telling you to convert the tables, proceed with the next activity. You must otherwise remove the cause of the errors before the tables can be converted. In this case, you should answer "No" to the next prompt, which asks whether the conversion transaction should start.
9. If you still only receive error messages telling you to convert the tables, choose "Back" and start the conversion.
10. Plan a job for the conversion. A list of the tables to be converted is shown for this. If the tables only contain a small amount of data (less than 10 000 records), then all the tables can be converted in one job. In that case, you can select all the tables. For larger tables, conversion should take place in several jobs. However, you should ensure that table CE4xxxx (where xxxx = operating concern) is the last table to be converted. Warning. No other changes can be made to the operating concern during the conversion. A copy of the table is generated during the conversion. The database system should have sufficient memory available for this copy. To schedule conversion as a job, use the "Schedule selections" function.You can display the current status of the conversion by selecting the "Refresh" icon. Tables disappear from the list once they have been converted sucessfully. If a conversion is taking a while, it is also possible to leave the transaction. You can then continue the conversion using DB requests -> Mass processing in one of the following ways: With the job overview. You access this by choosing System -> Services Jobs. Using the database utility transaction. You access this by choosing Utilities -> Database Utility in the ABAP Dictionary menu. You can use the status function to call up the status of the operating concern during operating concern maintenance. You need to activate all tables after conversion.
11. To analyze errors that have occurred during the conversion, you can use the database utility transaction by choosing Extras -> Logs. The has the same name as the conversion job: TBATG-date. You can also restart the conversion with this transaction. For more information on the database utility, choose Help -> Applicat help while still in the above transaction.
12. Once you have activated all the tables in the operating concern, generate the operating concern environment from within operating concernmaintenance. You can then use the operating concern again. Please, refer to the IMG documentation under Controlling ->Profitability Analysis -> Structures -> Define operating concern -> Maintain operating concern, for further details.
Thanks & regards,
Ronghua fan
↧
Re: Cumulation in Bex query
Hi Uma,
you need to create two formula's to achieve your desired output.
Formula 1
- Create formula 1 using key figure "aging" and goto calculation tab -->choose cumulated option (under Calculate single value as)..
- hide this formula
Formula 2
- create formula 2 using formula 1 and choose result(SUMCT) from date functions in operators
- goto calculation tab -->choose Maximum option from Calculate single value as
↧
Re: Is there any customer exit/BADI to explode a BOM material in Service order(IW32) components?
Hello Jogeswara Rao Garu,
Thank you for reply.
I have tried with that option but it is not working. will it work for all the BOM types? or only for Equipment types? in my case it is Material BOM(CS03).
Thanks,
Ramesh
↧
↧
Re: Shopping cart 1000xxxx (PReq. 35xxxx): 06 223 Document number 35xxxx not within defin ed interval
Hi Siddappa,
as given in the Note:
Transaction SPRO and then 'Supplier Relationship Management' -> 'SRM Server' -> 'Cross Application Basic Settings' -> 'Define Objects in Backend System (Purch. Reqs, Reservations, Purch. Orders)
Another way to get the control is BADI BBP_TARGET_OBJTYPE which you could implement.
Regards
Oliver
↧
Re: oracle_session_max_status_SID
This oracle_session_max_status_<SID> should pure application alert, we have to know based on what, solution manager shows this alert.
↧
Default Year
Hello All,
I have a condition "Production Year Prompt" which Returns data for the selected production year and the year prior to it.
@Select(Production Date\Production Year Number) = @Prompt('Select Production Year','N','Production Date\Production Year Number',mono,free,Not_Persistent,{'Current_date'}) or
@Select(Production Date\Production Year Number) = @Prompt('Select Production Year','N','Production Date\Production Year Number',mono,free,Not_Persistent,{'Current_date'}) - 1
I have to implement "Default Year" to the exiting condition. We are using BO 4.0 Sp5 and Teradata as backend. Any idea on how to implement in the existing code?
Thanks
Sandy
↧
More Pages to Explore .....
