Hi Jerry,
you can also use Eclipse on the WTS (Citrix).
I will send you a mail how you can do that.
Regards.
Thomas,
Re: One very annoying issue of ABAP in Eclipse - cannot set breakpoint in SAPGUI then
↧
↧
Re: How to Move Message from SMQ2 to SMQ3
Hi Raghuraman,
I want to know clearly how to move the messages from SMQ2 to SMQ3 not from SMQ3 to SMQ2.
For All Java stack adapters we create Sender communication channels. If SCC there is SA, I know this. I heard there is a procedure to move the faulty messages from SMQ2 to SMQ3.
I didn't work on this before.
Regards,
Teja S.
↧
Re: Freight value not populate on main item in case of free goods scenario
Hi,
Did you try having a Freight condition type maintained after the R100 condition and see whether the freight is getting added to the main item ? That is, while your item category (Pricing Indicator "B") & the R100 condition (Standard Routines) would take care of providing 100 % discount, now in order to have the freight - try maintaining it post the R100 condition. This Freight condition can have the Step from referring to the Main price condition in the pricing procedure and the freight condition setting - Calculation type as "%" (if the freight has to be calculated in some % of the item value of the product)
Please check and revert back.
Regards
↧
Re: Work Center is now allowed in the Function Location.
Dear R,
Yes, you right!)
We found some z-table on se16. Manually added to then what user requires, and now its fine.
Tnx a lot for ur support
Best Regards, Andrey
↧
Re: Internal Order Type: CO Partner Update
Hi,
which field will be effected?
Regards,
Ibrahim Mohamed
↧
↧
Re: Read Service only called once in Master Detail UI5 app
Solution was to add a model.refresh() on the detail page.
↧
Re: Maximum number of Storage locations that can be customized for a Plant in OX09
SAP has always have scalabilityoption hence there is no restriction for creating more than 1000
storage location it all about business need of the particular client. Meanwhile you have to raise the
concern over creating 1000 how far it can be handled in day to day business in real it may or might be
differ. In case If you come across any issue lets get help from abaper to extend storage location or Kindly contact with your queries to
SAP LABS @ WORLDWIDE
Worldwide Office Locations | United States | SAP
Regards,
Vivek
↧
Re: Can´t create a pricing using extension fields
Dear Alejandra Hernández,
If there is a dump then SAP should have a look at this issue.
Kindly create an incident from the page where error occurred and send it to SAP.
In the incident request you to provide the below information-
1. Who has the problem? Single user or multiple users
2. Steps to reproduce and also provide permission to reproduce issue at our end.
Regards,
Sowmya MS
↧
Re: How to access a SOAP service in HCP via HTTP
Were you able to get my example to work? I would suggest setting that up and then you will have something to compare to.
Regards,
Jamie
SAP - Technology RIG
↧
↧
Re: SuccessFactors Employee Central : Personal Information
Hi,
The issue disapeared after unchecking this option in provisioning:
...so I don´t know what was the real problem. Cross fingers to not need this flag active...
↧
Re: Plan cost is not updating in production order in MTO scenario
Hi Bhaskar
Check costing variant in production order... pl share screen shot if possible.
Are you using T code CO08?
Kamal
↧
Data load from SAP ECC or CRM into S/4HANA Marketing
Since one cannot load data into S/4HANA Marketing via SAP LT I wonder what mechanism is available.
Can somebody confirm the OData service route is the only one - beside flat file load (to load contacts and interactions)?
Has the OData service integration to be done via SAP HCI or PI?
Does SAP provide any IFlow integration content for this integration?
Thanks for any answer.
Thierry
↧
Re: BW 7.4 extraction error
Hi Guys
Thanks for all of you. I tried all this solution step by step, but none of them help as I said all data fields are correct there is no any error. Is good to send a flat file to you by email so you can try and let me know please, if that's been ok for you?
Thanks
Alan
↧
↧
Re: Regarding Bulk behavior in PutAway
Hi,
It seems, you have maintained the 'Mixed Storage in HU' with the value '1' ( Mixed Storage Not Allowed ),
Impact of this indicator is ' A handling unit in a storage bin can only contain one product and one batch (one quant) '.
Could you please check the HUs , either these are with same products and batches.If these are the mixed HUs ( different products 'or' same product with different batches ), system tried to find the Bins to store the relevant ones in one bin as per the putaway rule addition to existing stock.
C K Reddy
↧
Re: orabrcopy error - Error loading Oracle JDBC driver
Hello João,
Have you try to copy ojdbc14.jar from directry driver:\oracle\<SID>\1120<x>\owb\wf\lib to driver:\oracle\<SID>\1120<x>\jdbc\lib?
Regards,
Ning
↧
Re: Cloud connector service does not start after installation
Hi Ervin,
Sure, for another application _JAVA_OPTIONS were set to: -Xms512m -Xmx4096m. This wasn't compattible with SCC. After removal of the _JAVA_OPTIONS it worked!
Best regards,
Reinier
↧
Re: Entering SAP with less than 10 years to retire
Hi Laszlo and Veselina, Appreciate your valuable advises. Many thanks to you and to the organizers and moderators of this network. Hope I, at this age, could promptly act on these priceless suggestions from you, but in a more specific way. OK, so if SAP Basis is the recommended entry point, what specific area or work or training would you recommend, that I should begin with? I have started to self-learn basic coding in C++, using Code-Blocks IDE and a supporting website Sololearn, on my own accord. But I wanted to get trained on a particular area/ topic that can lead into paid work ASAP and also be useful in the long term. May be you could advise an area in which I can invest as a start-up company in parallel, to give me sufficient returns to continue my journey into SAP. Kind Regards, Aar
↧
↧
BAPI's for uploading BP (Vendor) along with extended roles (Company, Purchasing Data)
Dear All,
We are using S/4 Hana 1511, Here trying to upload the BP (Vendor Master) through BAPI "BAPI_BUPA_CREATE_FROM_DATA" , after uploading system creating document number with General role,
In this process we are unable to BP Roles to Company Code, Purchasing (FLVNOO, FLVNO1), Please suggest the required BAPI's for extention or creation of new BP Roles.
Thanking You.
↧
Re: How to make services, including CMS, only listen on localhost
Hi Glen,
The configuration you are doing is little complicated and confusing.
Localhost given as hostname definitely sounds good. In computer networking, localhost is a hostname that means this computer.
Basically the computer is running on an IP address. Best way to check is run in cmd : netstat -aon | find "6400"
This will verify the cms is running on an IP which is assigned to the computer but should not be termed as localhost.
About the Configuration property : These properties are used to Bind the IP/hostname to the servers, give Specific port assigned to the servers.By default installation IP are allotted randomly for all servers except CMS , WACS which is 6400, 6405 respectively. Customer can change this values if they do not want random ports to be used. This concept mainly works when there are more than 1 nodes in cluster and firewall between them so to open all ports between them they assign specific ports to communicate each other.
Now, when you goes into SIA properties and change the CMS port to 6405 this is not correct because default installation give WACS 6405 and when you change it will ask you to assign a value from 1-65535 which is range of ports a computer can have.(Combination of Reserved / Random etc) Check : https://en.wikipedia.org/wiki/List_of_TCP_and_UDP_port_numbers
Just for reference default ports for BI : CMS (6400) , WACS (6405), SIA (6410) rest are assigned random until changed by the user. Check BI Admin guide for best help.
Hope this will help.
Regards,
Mahak
↧
Re: PI / HCI message mapping issue
Hi Kevin,
You can use below mapping, i only used emplStatus for an example you can include other criteria also. There is no need to change the context change.The fields under job_information node direct field to field mapping.
Regards,
Praveen
↧
More Pages to Explore .....
