I have sucessfully merged, but I have a [beginner - sorry!] problem.
All of my selected fields from the first query appeared in my report, however,
Only the merged column from the second queryappeared in the report, how can I add the other columns?
Re: How can I append two tables in a WebI query?
↧
↧
Re: Issue logging with IC_AGENT
Hi Daniele,
You have to check, for example, browser compatibility in Product Availability Matrix:
Try to upgrade your system to the last Support Package.
Regards.
↧
Re: Transports during EHP update
Hello
You are allowed to bring in transports to the main system until you reach the Lock Development phase on SUM.
Once you cross the phase the imports are not possible and when you try to import a transport during this phase you will most likely get the error "upgrade is running no import possible".
You are only allowed to import the transports into the system once you have completed the upgrade.
Regards
RB
↧
Re: What is the implementation process for SAP MM Module ??
Ok, actually I don't know exactly what it mean. Sorry for that, and I stay on my question that what are the steps in implementation and what are the report contents in it.
↧
Re: Approved spec not able to connect to report tree.
Thanks all experts for your valuable feed back here the problem what we are facing is we creating spec and we are sending it for approval in the mean time we are creating the draft report for the concerned spec without the complete release of the spec and once that spec got approved and complete released the validate date of the spec and draft report creation date (Earlier date of draft report creation) will be mismatching.And we are not able update the spec approval date to the concerned report table ESTDH because of this error .
And this draft report we are sending for the approval team to check the contents of the spec prior to complete approval of the spec as per business need.
Kindly advise.
Thanks.
Kiran
↧
↧
Re: CATS Approval Screen - Need to be shown in Days
as this displays the recorded times form CATSDB, You need to have time also recorded in DAYS
so first you need to maintain in CAT2
1)Modification when the unit is determined: function group CATS, form GET_UNIT_OF_HOUR. At the end of the form set field UNIT_OF_HOUR. 2)Change the MEINH of each record to the desired value via exit CATS0002. In the standard processing when the user records data then in the subroutine load_catscell_to_catsdb of program LCATSFZ3 there is a check if the unit of measure is equal to the unit being recorded. If it is not equal then the data is recorded only in quantity which is correct. As the Unit of Measure contains the value with respect to hours and catshours is filled only when Unit of Measure is equal to unit being recorded. check table t006 "The unit is determined from the first entry in the table T006 for the dimension TIME, under the condition that the number of seconds defined i s 3600 (1 hour). http://scn.sap.com/thread/3213811 However, I ll confirm again if something is available in MSS, As of now I don't see in customization
↧
MCI5, S063 - Update not possible
Dear All,
I would like to update info structure S063, after step one - copy 000 version into &(1 I would like to update my structure. After running report RIPMS001 I recieve following error IM 850 "no info structure found". Please advice what is wrong and if update of S063 is possible at all.
If I try with the same procedure with S064 all is working fine.
Regards.
K.
↧
Re: Employee Timesheet not displaying in Approve timesheet tab of Manager
can you check via SWI5 in backend for the user where these items are lying?
So in SWIA, you can see the agent correctly assigned? ie approver?
are you using UWL or POWL? please check if the portal is connected to backend system correctly ie thru UWL? if you are using UWL etc and getting the workitems
does it fail for only this type of workitem or all types of workitems, then you need to check your connection to the backend
↧
Re: Power failed during NW upgrade，error occurs during restart
Hi Ali,
Pls. forget about the problem I said:
"
Plus, I use command sapcontrol to start my shadow instance, but no matching instance found. It's kind of wried. Do you know why?
linux-q0fx:s01adm 64> sapcontrol -nr 0 -function InstanceStart linux-q0fx 01
15.12.2013 08:09:17
InstanceStart
FAIL: Invalid parameter: No matching instance found
"
Turns out I typed wrongly...
But I also got errors when I correct it:
linux-q0fx:s01adm 68> sapcontrol -nr 01 -function InstanceStart linux-q0fx 01
15.12.2013 20:28:01
InstanceStart
FAIL: NIECONN_REFUSED (Connection refused), NiRawConnect failed in plugin_fopen()
Same as this situation:
linux-q0fx:s01adm 65> sapcontrol -prot NI_HTTP -nr 01 -function Start
15.12.2013 20:20:32
Start
FAIL: NIECONN_REFUSED (Connection refused), NiRawConnect failed in plugin_fopen()
Thank you!
Best Regards,
Carina Hu
↧
↧
Re: Leave types getting collision when applied from r3 in 2001 by time admin
there is not Note for this as noted by Mithun as you are following the process correctly
If Time admin updates the leave directly in 2001, you have a leave request pending for same date ie in SENT Status you need to complete the process
in this case when you run rptarqpost, you must do with POST with infotype match, please read the documentation of this field
also, note if you have leave in 2001, you ll get the status error when you post them for this date follow above method and for the error status records use RPTARQERR
read the documentation of all these reports.
try avoiding update in 2001 directly, if you have to, on managers behalf, approve it via RPTARAPP and then post it etc
↧
Re: Error while importing composite roles GRC AC 10.0
The issue I'm having is similar, but not exactly the same. I, too, am receiving this error message. However, I'm only getting it on my Q system.
I have a set of source files - one for my single roles, and one for my composite roles. I've used these to load roles into my Dev system, and both loaded fine with no errors. Tested etc, 100% good to go.
Same files in the Q system results in 100% success on the single role load file. Testing shows that the role names appear within BRM. The corresponding composite role file results in the above discussed error messages for certain roles, NOT ALL ROLES.
When I examine those roles without the error message, I find them to have been loaded successfully. Composite roles have single roles listed in them.
When I examine those roles WITH the error message, I find them to not have any single role name listed.
I've re-run the authorization sync job and have confirmed that all the roles associated with the composite roles in fact are available in the Q system.
At this point, I'm not sure why these roles are not loading, as I feel certain the data load template files are without any problem.
Thanks,
Santosh
↧
UI5 FileUploader, CSRF Tokens, and IE9
Hi Guys,
I'm working on a UI5 application, and seem to have run into an issue uploading files in IE9. Here is the breakdown of what I have tried so far:
1. Used the UI5 out of the box FileUploader control from SAP. This control uses a <form> post to send the file to an endpoint. In my case this is a restful service sitting on an R3 server. This service requires a CSRF token to complete a modifying request. I am able to get this token, but I am unable to force this token into the request headers of the form post.
2. Implemented a jQuery ajax request with the token added, following the suggestions of this thread. I thought I was home free until I tried it in IE9 and found that the browser does not use the File API, and is unable to access any details of the file. This effectively eliminates this solution as you have no payload to send through the service.
3. I have attempted to write a .NET page in between the website and the upload service. The file is posted to the middle page, the data from the file and the token is pulled out of the request by the middle page, and then an HTTPWebRequest is sent to the service. Unfortunately, this .NET Page is not sitting on the R3 server (obviously) so the SSO cookie that I am using between the original site and the services is not available to use.
So, can anyone help?
- Has anyone found a way to use the FileUploader control with IE9 (found a way to get the CSRF token into the request for the R3 server)?
- Has anyone come up with a different approach to uploading files to an R3 server with IE9?
- Has anyone had success with this "anti-XSRF cookie" discussed in this article?
Any help would be great. Thanks.
↧
Re: Report Tree is not triggring once spec was approved
Thanks all experts for your valuable feed back here the problem what we are facing is we creating spec and we are sending it for approval in the mean time we are creating the draft report for the concerned spec without the complete release of the spec and once that spec got approved and complete released the validate date of the spec and draft report creation date (Earlier date of draft report creation) will be mismatching.And not updating the spec approval date to the concerned report table ESTDH because of this error .
And this draft report is customized report we are sending it for the approval team to check the contents of the spec prior to complete approval of the spec as per business need.
Kindly advise.
Thanks.
Kiran
↧
↧
Re: Can't Find Table outlines in WebI report
Hi Praveen,
In launchpad, Click on Design mode and select the field on which the outline is enabled to see the Outlines.
Regard
Sunil
↧
Re: SAP HR Process and Forms attachments storage Location
You can choose anyplace to store these attachments ie you can use different content server if you want to use ie Open text
Scase and organizer is sap delivered
check here http://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f273461e5132c3e10000000a1553f6/content.htm?frameset=/en/82/b6b94278560c31e10000000a1550b0/frameset.htm For more information about configuring the process object in Case Management, see the Implementation Guide (IMG) for HR Administrative Servicesunder Configuration of Forms/Processes →Process Configuration →Technical Settings → Set Up Process Object.
↧
Re: Output of validation report ( text, formating, tabulator ..)
Hi Christian,
I would suggest you the below points
- Create a node with 2 attributes viz description_text & amount
- Populate the table entries as per your requirement and set to context node as below
ls_data-description_text = " Some text " .
ls_data-amount = 2000.
append ls_data to lt data.
- Create a table in layout editor with text view ui element as column's editor. because, in text view you can color the text by using property "SemanticColor"
- Set the design property of table ui element to "Transparent"
- You can set the width of columns as per your requirement viz 1 st column 80EX, 2nd column - 15EX
Now the format looks better and more pleasant.
You can also try with SAP Adobe forms for your form design as per your requirement
Hope this helps you.
Regards,
Rama
↧
Re: Cannot Delete Requests In My InfoObject Which Occured During ETL - Short Dump
Hi Lee,
if you want to delete the request which was red at info package level, then try to delete the request directly from PSA table. lets whether it allows us without any dump or not.
Thanks
↧
↧
BI 4.0 : (CS) "DBDRiver Fail to Init" - DB2 Database
Hi,
We are using BI 4.0 SP6 On Redhat Linux. We have installed DB2 Client (Version 10.1.3).
WebI report is not working and giving below error when refreshed
Database Error: (CS) "DBDriver failed to init: /<BOInstall>/dataAccess/connectionServer/drivers/lib64/libdbd_wdb2cli.so (IES 10901)
On Unix, DB2 command is working and we can connect to database. We have both 32 bit and 64 bit installed. PATH variable have DB2 path added.
Any ideas?
↧
Re: No amount tolerance range entered for company code M001 ?
Supose you have a blank(empty)tolerance group for your CoCd and did the rest configuration IMG>Financial Accounting (New)....Define Tolerance Group for Employess. Then you must Assign User/Tolerance Group (your sap ID) to the blank(empty) tolerance group in the
| Document |
| Tolerance Groups Menu |
↧
Re: Phase text changed - regenerate MSDS?
Thanks Ralph, yeah, we do need to re-generate MSDS, versioning is another topic.
But what's the proper way to identify the impacted MSDS? Seems no standard ways, right? Does it mean we will have to develop our own ABAP? Please advise
↧
More Pages to Explore .....
