Hi Team
I do understand that we can personalize "report map", "Doc Summary" , "input ocntrol" at left panel of WEBI for custome user group in CMC.
But it allows me to choose above panel avaible for users
Can I set default that whenever a user open webi document . first"Input control panel " should display (by default).
Any work around ?
thanks
Regards
Parul
I dont think there are any standard reports for your requirement. Have you tried checking the report
VB(7??
Check this thread it might give you some idea for the direction you have to go.
Re: Rebate Payments Drilldown - VBO3
Thanks,
Ravin
hi jack,
i think your are very familiar with the marker update options for full load and delta loads.
as you said, till yester day, repair full load - with our market update
yester day onwards it will be delta, so its loading with marker update.
after this load, have you got any data mismatch or wrong data issue at bex report? if not then your loading procedure will be in right way.
Thanks
Hi Pamela
Have you check the notes below?
1803749 - Shipments are not send to ERP for execution
1862532 - ERP TM: stage times and loading times are filled wrong
Regards
Eduardo Chagas
Hi priya,
I still confuse,
what is TDATE, RDATE,
why there are no TDATE at variable declaration ?
do you have email address I can forward to?
Hi Stefan ,
Solved these issues, please could you tell me how to add the "/UI2/Transport"
Hi Imran,
MRP for stock material is a common scenario, however MRP for non stock item is applicable in case of BOM. In BOM, You need to set item type as Non stock for the components of BOM with the material text.
Best Regards,
Anil
Hi guys,
I have a smartform I'm working on, and I have a field which normally should be displayed in 2 languages: DE and EN. However, the field is only displaying in DE and not in EN. Does anyone have an idea of what could be the problem that the field is not displaying in EN ?
P.S. If I go to se63, I cannot see anything there, it is all empty in all languages, but the smartform still executes well.
Thank you in advance,
Shkelqim Gerxhaliu
I was able to figure it out. When inserting the BLOB i had to have
to_blob(X'BLOB INSERT HERE') and now it stores the correct BLOB.
Hope this helps out anyone else who had the same problem
Hi Experts,
Navigation of collection using a standard outbound plug(Navigate_display) at window level which will navigate from component(BT126H_APPT) to component (ICCMP_AUTO_VEHM) that i have done with passing lr_col in OP_navigate_display , its working fine.
This (ICCMP_AUTO_VEHM) component has a event button as more_options which again will move to other component(PRDIOOV).
Now My question, i want to Navigate from (BT126H_APPT) hyperlink to (PRDIOOV) Overviewpage
I have use this code in EH_ONEVENT
CALL METHOD cl_crm_ui_descriptor_obj_srv=>create_entity_based
EXPORTING
ir_entity = lr_child_entity
iv_ui_object_type = 'PRD_OBJ'
iv_component = 'PRDIOOV'
iv_ui_object_action = 'B' "display
RECEIVING
rr_result = lr_nav_descr.
CREATE OBJECT lr_data_collection
TYPE
cl_crm_bol_bo_col.
" Add the UI Descriptor the BOL Collection
lr_data_collection->add( lr_nav_descr ).
lr_data_collection->insert( iv_bo = lr_iobject
iv_index = 2 ).
" Get Instance of Navigation Service
lr_nav = cl_crm_ui_navigation_service=>get_instance( ).
" Navigate to Target Component
IF lr_nav->is_dynamic_nav_supported( lr_nav_descr ) = abap_true.
lr_nav->navigate_dynamically( lr_data_collection ).
ENDIF.
Now now the problem is in spro config -- define nav bar profile -- the Zbusiness_role in which the standard UI object type of PRD_OBJ is mapped with
ICCMP_AUTO_VEHM component target_id ,
So I want to know how to create a Z UI object type of PRD_OBJ and assign a target_id of PRD_OBJ(display).
Please guide me , or is there any other way to achieve this....
Regards,
Sumeet
Lucas,
Yes, should work fine. SMP 2.3 ships with Agentry 6.1.x depending on your sevrice pack level, so that is beyond 6.0.30 that Sales requires.
Jason Latko - Senior Product Developer at SAP
We are on 4.1 SP1 and trying to upgrade to SP2 but if IS 4.2 is available or will be available soon, we might go for it.
HI,
My solman ver is 7.1 .bw client is same as solman.
we have performed basic set up,however not used if something is missing ..do you know how to set up job schedule for extraction ?.
i Will check the t code given by you.,,as the data model looks different than normal bw...I assume data gets updated to DSo via jobs directly ?.
what are DSo, cubes which should have Dara for change management reporting ?.
thanks
nilesh
Hi Vijay,
where are you sending the output of UDF?
you need to add more condition to route the message if the delivery number is not in range or not present. Please provide the full logic of map to help you with the issue.
Regards,
Harish
Hi Experts,
Can you please let me know the way to find the original value of a changed attribute?
eg: I have an attribute "NAME" and the original value: ABC
Now, I changed the value to: DEF and click save. At this point of time how do I get the original value ABC before the actual save/commit happens.
I tried the method "IS_PROPERTY_CHANGED" in the class: "CL_CRM_BOL_ENTITY" but doesn't seem to be working.
Thanks in advance.
-Chandra Indukuri
When you flatten out the hierarchy your element linking will work just fine on flat structure.. So the approach should work..
However using this you would also lose the fold and unfold functionality of hierarchies..
I am trying to build an RMA form in SAP. I am trying to pull up database information from one table based on an order ID on the form that is from another table. If I were to write the SQL statement, it would look like this:
SELECT RM.itemNo, RM.description, RM.RMA_Qty, RM.Reason, RM.Comment FROM [@NWR_RMADT] AS RM INNER JOIN OSCL WHERE RM.docentry = OSCL.callID
I have a field on the form for the OSCL.callID (F_171) which is the RMA #.
I then want to pull the information from another table [@NWR_RMADT] where the docentry field = the RMA # (F_171).
I created a hidden Formula field (Logic_1) that I am trying build and pull data thru but it is erroring out: [dbo].[@NWR_RMADT].docentry == F_171
Without this type of 'Where' clause, the report pulls ALL rows in the @NWR_RMADT table.
Any ideas on how I can get this resolved?
Thanks.
Yes! Statistics! I'd love me some, too!
Dear all
Our French customer needs to meet this legal requirement but i'm a little confused about solution.
Sap released 2 notes (N° 1906078 and 0001923322) but after implementation of these notes which transaction is to be used?
Transaction S_ALR_87012287 is to be used or others?
Could you indicate me the steps?
Thanks a lot for all your indication and your help is really appreciated!
Regards.
