I am at the step "lock users" for an ERP time-slice using TDMS4.0
The strange thing is that this easy step cannot be passed.
I get the error "there are no values for the global parameter" as shown in attached.
Would you please help to have a look?
Thanks.
Thanks, but problem is that this 'simulation' should be done on daily basis and in the same time when some other users are performing biling in FICA....
blagica
Hi Joey,
Technically the VPN tunnel can be used for the connection between the cloud solution and the on-premise system. This can be configured during the Communication System definition. For more details, please refer to the Installation Guide and HelpCenter.
Hi Vadim - attached is the log from me running it in simulation via t-code UJKT. The ONLY thing I changed in the Badi you provided was I only passed in Time member 2012.12 since the logic called will get the prior time member (2012.11) and it all worked.
Next, as you suggested, for the DM prompt, I changed the DIMENSION TIME = %PLAN_TIME_SET% in the Badi
and initiated the DM pkg in PLANNING model, and it worked successfully. I'm now seeing the data pushed in the PLANNING model.
Thanks you so much for your help, it is greatly appreciated!
Thanks Harish. I am really new to PI, Never used it before. So I am finding my way to implement this scenario. I will update on questions as I proceed. Thanks for the help so far.
Indeed the subject title is misleading. Good subject titles and well thought out questions has a significant influence on the quality of the answers.
But back to the topic: SAP Developers and Consultants often experience "office politics" on SAP implementation projects when legacy systems are being replaced. That is also perfectly normal as it has a big impact on the colleagues who prior were programming the mainframe systems and front ends for them. Hence I mentioned that you must keep your chin up and remain above such things.
ALV does however not always help, even if they prior used AS400 command line type UIs...
Strategically you can first give them SM30 parameter transactions, and then convert them to ALV when the scream arrives. Then you need to make decisions between going for a real application, an automated update or forcing them to Sm30 or ALV with or without transport recording, or current settings.
If the requirements are well thought out by the functional SPRO junkies then you can go directly to start and collect 200 USD.
If not, you get called an ALV. ELSE SE16N. ENDIF.
I would be very interested whether other ABAP developers also have these problems, how you deal with it and tips and tricks to get the legacy system folks onto the new UIs and logic?
Cheers,
Julius
I used SWPM to rename system.
It is good tool, but the renamed system does not start. I created VMWare clone of the ABAP system to a different host. Rename tool worked pretty good and finished successfully, but the new system did not start.
Best Regards,
Yevgeniy Kisselev
Hi Joey,
More details on the requirements would be needed to verify if the components are sufficient. However, I recommend going over the component installation checklist provided in the Master Guide and check if those components are in the installed list. It will be up to you to determine what is relevant or not based on the usage of the component.
I hope this helps.
Regards,
Kathryn
Hi Sridharan,
We have customized the SAP_SPM_USER role to hide Administration links.
Hi experts,
Scenerio:
We need to copy a complete Sales Dashboard, connections and webservices to replicate all model to a new client. we have two different clients running on the same server and
business objects platform .
Sumary
Client A dashboard ->copy -> to Client B.
Objects:
We try to copy all objects with multitenancy tool to Client B
, but the copy of the webservices is pointing to the original object Client A.
Anybody knows a solution to this case?
BO Version:
BOBJ 4.1 SP2
Regards.
Hello,
I built this little report where I can click on an arc from this Donut chart (which represents supervisors) and the table underneath displays the chosen supervisor's employees using a filter.
What I need now is to determine the number of entries/rows that are currently being displayed in the table (including those that go over the visible row count).
The json data is in one model that I attach to the table. And when an arc of the Donut is selected, I add a filter on the table :
Donut Chart:
selectData: function(e) {
...
aFilter.push( new sap.ui.model.Filter("SUPER_PIN", sap.ui.model.FilterOperator.EQ, super_pin));
oTable2.bindRows({
path: "/ROOT/DETAIL",
sorter: new sap.ui.model.Sorter("EMPL_PIN", false),
filters: aFilter
});
//DETERMINE oTable2 NEW ROW COUNT
...
}
oTable2.setModel(oModelBankedTime);
oTable2.bindRows("/ROOT/DETAIL");
I've been trying to use every method from the sap.ui.table.Table API but cannot get this information.
Also, none of the Table events get triggered when I programmatically apply the filter (using the code shown above), so I can't get an event context there.
Any ideas?
Many thanks!
Scott
Hi Sushant,
This is the screen shot that I have taken after making tab visible. That means last tab "Note" is hidden here. Now the question was I wanted to bring this "Note" tab back as original view. As you said I tried already both ways and it was not working. But finally I found what was happening for not able to bringing back is in "Tab Caching enabled" visible field was deactivated. After activated this field I am able to get back this tab. 
The strange part is -
PI 7.31 single stack is able to send HTTP request to 2 servers perfectly. The issue of 'ERROR_SENDING_HTTP_REQUEST' is coming for a specific server where i gave host name,port..difference is that prefix is / only.
The error is for HTTP request send from PI 7.31 ,but to the same server with same details - HTTP request is going perfectly OK.
any pointers on it ?
regards
Thank you sathish,
But user needs to have it as filter itself. I tried it to change at universe level by defining an objects and to edit the lov to having all the 75 fields at the select class. At report level it while fetching the created object in the report it will show at prompt level as lov containg the values of 75 fields but need to analyze whether the usage is effective or it will have any negative impact on teh report.
Regards,
Madhu
Hi Shashi,
If the GL account for which you are getting the error, how did you post the document at first place? Did you change the "G/L accounts for document splitting" setting after posting the document with GL account in question?
Anyhow, if the document was posted then system is simply reversing the posted document which means that document splitting existed for that particular document.
Please advise
Thanks
Naseem
Dear Nastassia,
Answering your first question
Your second question:
Please let me know where the values of Off-cycle payroll run are getting calculated? I assume you are checking this in Payroll Journal program. If this is the case you have an option for the field "Payrool Type" select Blank entry " " Regular payroll run. In that case Off-cycle amount will not be included.
Regards,
Hari
Thanks a lot Naseem for your answer....But what is the way out for this.
your Issue solved or not friend ???????
Hi Chandu,
I have check in CSADMIN it should be OK. i have search this error in SCN, there are many result. but there no related with http_interface. so i create this discussion.
Error of http_interface with function get:
Below are screenshot of CSADMIN:
Below area information of Content Server:
serverType="SAP HTTP Content Server";serverVendorId="Copyright SAP AG, All rights reserved 1998, 2001";serverVersion="6400";serverPatch="9";serverBuild="201";pVersion="0046";serverStatus="running";serverStatusDescription="";serverDate="2014-01-24";serverTime="04:54:58";startUpDate="2014-01-23";startUpTime="09:02:17";lastAccessDate="2014-01-24";lastAccessTime="04:54:54";
contRep="ZCR_TEST";contRepStatus="running";pVersion="0046";storage="ContentStorage";storageVersion="015";storageBuild="201";contRepDescription="Content Repository Test";contentStorageHost="[SERVER];contentStorageName="[SID of DB]";secKeyVerification="n";defaultDocProt="";
Is there something wrong that i have done, if you look at my screenshot?
Thanks for your response,
Best regards,
Husin
Hi Sigi & Alok,
Thanks for guiding me.
Have done the same as said by Alok.
But still its not hiding from Portal screen.
Regards
Shaik
